Ashirbad Electronics
All articles

AC Installation in Tezpur: What to Expect and How to Get It Right

24 August 20265 min read
Newly installed split AC indoor unit on a white wall

A new AC is only as good as its installation. Poor installation is behind many of the gas leaks, water drips and weak cooling complaints we fix in Tezpur. Whether you are fitting a brand new AC or shifting an old one, here is what proper AC installation looks like.

Before installation: choosing the right spot

Indoor unit: high on a wall with clear airflow across the room, away from direct sunlight and not directly above a bed or desk. It should be close enough to an outside wall to keep the copper pipe run short.

Outdoor unit: in a shaded, well ventilated place with space around it for airflow and service access. In Assam it should sit on a strong stand or wall bracket, raised above ground where rainwater can collect.

The installation process

  1. 1Mounting plate fixed level on the wall, so water drains properly
  2. 2Wall hole drilled at a slight downward angle toward the outside
  3. 3Copper piping connected with clean, properly made flare joints
  4. 4Drain pipe routed with a steady downward slope and no sags
  5. 5Outdoor unit fixed on a bracket or stand with anti-vibration pads
  6. 6Vacuuming the pipes to remove air and moisture before releasing gas
  7. 7Electrical connection with a dedicated MCB and correct wire size
  8. 8Test run checking pressure, cooling and drainage

Signs of a poor installation

  • Water dripping from the indoor unit within weeks
  • Gaps around the wall hole that let in dust, insects and rain
  • Outdoor unit placed in direct afternoon sun or a closed space
  • Long, coiled copper pipes that reduce efficiency
  • No vacuuming step, which leaves moisture inside the system

Shifting an old AC

When moving an AC to a new room or house, the gas must be pumped down into the outdoor unit before disconnecting. Done wrong, you lose gas and may need a refill. A professional AC shifting service handles pump down, safe transport and reinstallation.

Do you need a stabilizer?

Many newer inverter ACs work across a wide voltage range. If your area sees frequent fluctuations, a suitable stabilizer adds protection. Ask your installer to check your supply before deciding.

Book AC installation in Tezpur

Ashirbad Electronics installs and shifts split and window ACs of all major brands in Tezpur. Our technicians follow the full process, including vacuuming and test runs, so your AC performs the way it should from day one.

Need help with your AC?

Book a visit from our technicians in Tezpur.

Related searches: ac installation tezpur, split ac installation assam, ac fitting tezpur